top of page

How to Choose Lab-Grown Diamond Earrings: Studs, Hoops and Drops

4 days ago
6 min read

Against a simple shirt, studs place a point of light on the lobe, small hoops trace a curve, and drop earrings bring the diamond lower. When choosing lab-grown diamond earrings, start with the silhouette you like, then see how it sits on your own ears.


Side profile wearing a single round lab-grown diamond stud
Figure 1. A solitaire stud keeps the point of light on the earlobe. (Illustration)

Look straight into the mirror to see how much of the lobe is visible. Turn to the side to check the setting and fastening, then turn your head to see how the earring moves. You can browse our lab-grown diamond earring collections for styles to compare.



Contents



How large will the studs look?


On a narrow lobe, a round diamond can sit close to both edges. The same stone can have much more space around it on a broader lobe. Turn your ear towards the mirror to see how wide the lobe is at the height of the piercing and whether the hole sits off-centre.


One-carat round stud reference on narrow and broad earlobes
Figure 2. A one-carat round diamond per ear is the reference in both views. Narrow lobe on the left, broad lobe on the right. (Illustration)

Carat measures weight. A diamond's face-up size can be compared in millimetres. [1] Take a one-carat round diamond about 6.5 mm across. It would span roughly 70% of a 9 mm lobe at the piercing and about half of a 13 mm lobe. Actual diameters vary with cut proportions. [2]


Our Diamond Size Guide lets you compare a round diamond about 5 mm across with one about 6.5 mm across. These are useful starting points for trying on half-carat and one-carat studs per ear. If you like a bezel or halo, check the width of the complete setting as well. For prices and metals, see our lab-grown diamond stud earrings guide.


Once you have a size in mind, check whether the price is for one earring or a pair. A pair of round diamond studs commissioned at our Hong Kong showroom used stones of 0.82 and 0.83 carats, approximately 1.65 carats in total. [3]



How lobe thickness affects stud fit


A stud can look in proportion from the front and still tip down when viewed from the side. Check the thickness of the lobe, how the back sits against it and how far the setting projects. Two people with similarly wide lobes can need different post lengths.


Side-by-side one-carat round stud reference on thin and thick earlobes
Figure 3. A one-carat round diamond per ear is the reference in both views. Thin lobe on the left, thicker lobe on the right. (Illustration)

If your lobe is thicker, check that enough of the post comes through for the back to fasten securely. If your lobe is thinner, fasten the stud, let go and look from the side to see whether it moves or tips. A lower setting or a broader back that sits flush against the lobe can be worth trying if the diamond faces downwards.


Front view of a diamond stud and side view showing its setting, smooth post and push back
Figure 4. Front and side views of a stud. The side view shows the setting height and the space available on the smooth post. (Illustration)

Use a four-prong round lab-grown diamond stud as a starting point, then try a different setting from our lab-grown diamond stud earring collection. If two studs look similar from the front, compare how closely their settings sit against the lobe.



How piercing position changes the silhouette


Measure from the centre of the piercing to the bottom of the lobe to see where the earring will sit. If the distance is about 3 mm, a centred round diamond about 6.5 mm across can extend just past the lower edge. The same size can leave more space underneath when worn in a higher piercing.


Round studs in higher and lower lobe piercings
Figure 5. The stud on the right is closer to the lower edge of the lobe, leaving less space below the diamond. (Illustration)

Piercing position also affects how much of a small hoop is visible beneath the lobe and how close a drop earring sits to the jaw or collar. Look from an angle to see whether your lobe sits close to your cheek. If it does, check whether the inside of a hoop touches the cheek and how freely the upper fitting and drop can move.


Round stud, small hoop and pear-shaped drop earring shown at a similar angle
Figure 6. From left to right, a stud, a hoop and a drop earring. Each places the point of light and the outline at a different height. (Illustration)

For a point of light on the lobe, compare studs from the front. If you want an arc that is visible from the side, try a hoop. If you prefer the diamond to sit clear of the lobe, start by trying a short drop.



Hoop earrings: inner diameter, closure and profile


A close-fitting hoop can follow the bottom of the lobe while leaving enough room for the lobe to rest naturally. Measure from the piercing to the lower edge, then ask your jewellery consultant for the distance from the post to the inside bottom of the closed hoop. With a thicker lobe, also check the room behind the fastening. [4]


Small hoops with close fit and visible clearance below the earlobe
Figure 7. The hoop on the left sits close to the lower edge of the lobe. The hoop on the right leaves a visible gap below it. (Illustration)

If there is about 8 mm between the piercing and lower edge of the lobe, a hoop with slightly more than 8 mm of usable height is a starting point to try on. Fasten it and turn your head to see whether the lower edge touches the metal or the closure presses against the lobe. With a lower piercing, you can try a closer fit and see whether the hoop moves as you walk.


Close-fitting hoops come in different profiles


A slim hoop gives a fine curve. A wider band of diamonds has more presence from the front. Two hoops with a similar outer diameter can leave different amounts of space for the lobe, depending on the thickness of the band. For an oval hoop, ask for the inner height and width separately.


Our lab-grown diamond pavé hoops have approximately 0.50 carats across the pair. Explore the lab-grown diamond hoop earring collection to compare close-fitting hoops with styles that have a larger outer diameter.



Drop earrings: length, weight and movement


Start with where the main diamond falls. A short drop can keep the point of light just below the lobe. A longer one may fall towards the jawline, making its movement more apparent as you turn your head. With a low piercing, try a lighter style with an upper setting that sits flat against the lobe.


Short and long pear-shaped drop earrings showing where the diamonds fall
Figure 8. A short style keeps the main diamond just below the lobe. A longer style brings it farther down. (Illustration)

Two earrings of similar length can put the main diamond near the top or at the very end. A hinged link lets the lower section move independently. Look straight into the mirror, then turn your head and take a few steps. Check whether the drop touches your cheek, hair or collar and whether the diamond faces forwards when you stand naturally. Compare the length from the piercing to the tip and the weight of each earring.


Our pear-shaped lab-grown diamond drop earrings place the pear-shaped centre stone at the tip. Explore the lab-grown diamond drop earring collection to see how other silhouettes place the diamond.



How to compare styles in a fitting


Try each pair in front of the same mirror. Pay attention to the position of the diamonds on both sides and the outline as you turn your head. To compare a few styles in person, see our showrooms in Hong Kong, Macau, Taipei and Kuala Lumpur.



Frequently asked questions


Does one carat per pair mean one carat per ear?


For a pair with one matching centre diamond per earring, one carat total is about half a carat per ear. One carat per ear adds up to two carats for the pair. If there are accent diamonds, ask which stones are included in the stated weight.


Do the two diamonds in a pair of studs have to weigh the same?


Compare the diamonds side by side for face-up diameter, colour and brightness, then compare their height once set. Two diamonds of the same weight can still look slightly different in size.


Can I wear one-carat studs if I have thicker earlobes?


Yes. Compare the stone's diameter with the visible width of your lobe, then check that enough of the post is available for the back to sit flat and fasten securely.


What should I ask when buying small hoops online for a higher piercing?


Ask for the distance from the post to the lowest point inside the closed hoop. Compare it with the distance from your piercing to the bottom of your lobe. If your lobe is thick, also check the space behind the fastening.


Are short drop earrings always lighter?


Weight also depends on the metal construction and the stones. Ask for the weight per earring when comparing short and long drops. When trying them on, look for an upper fitting that sits flat and see how the drop moves against the side of your face.


Why does a matching pair sit at different angles on my ears?


Piercing height, angle and lobe thickness can vary slightly between ears. Try on both earrings at once, then compare the direction of each diamond and how the bottom edges line up. With studs, check how the backs sit on each lobe as well.



Sources


 
 
bottom of page