top of page

What Is Diamond Equivalent Weight (DEW)? How to Read a 1 Carat Label

Nov 5
5 min read

A diamond and a moissanite may both be advertised as “1 carat”, but the listings can be describing different things. A diamond marked 1.00 ct normally weighs one carat. A moissanite marked 1.00 ct DEW is described using the size of an approximately one-carat diamond as a reference. The two stones can look similar in size while having different compositions and actual weights.

Start by checking the material, then read the face-up dimensions and actual carat weight separately. This also helps when comparing cubic zirconia (CZ) or jewellery listings that give measurements and a combined weight for several stones.

Three round faceted loose stones next to a jeweller’s calliper

Three round stones with similar face-up dimensions, shown beside a jeweller’s calliper.


Contents


1. What does diamond equivalent weight (DEW) mean?

Diamond equivalent weight (DEW) expresses a gemstone’s approximate size by reference to a diamond of a comparable shape and size. In the Charles & Colvard moissanite size chart, for example, a 6.5 mm round moissanite is listed as 1.00 ct DEW. The same row gives the moissanite’s average actual weight as 0.88 ct. Both figures describe the same size specification.

Actual carat weight is measured on a scale. Under the GIA definition of carat weight, one metric carat equals 200 milligrams, or 0.20 grams. Carats can be used to report the actual weight of natural diamonds, lab-grown diamonds, moissanite or cubic zirconia. Check whether the number is followed by “DEW” or described as an equivalent.

About 6.5 mm is a common reference for a round one-carat diamond. Cut proportions and depth affect how wide a stone is, so two round diamonds of the same weight can have different diameters. For ovals, pears and other non-round shapes, compare the length and width with stones of the same shape.


2. Why do three stones of the same size weigh differently?

A stone’s weight depends on its density and volume. Imagine three round stones with the same cut profile and depth, each about 6.5 mm across. Using a 1.00 ct diamond as the reference, their weights can be estimated from the specific gravity of each material.

Equal-volume model: A diamond 1.00 ct, B moissanite approximately 0.91 ct, and C cubic zirconia approximately 1.59 to 1.70 ct

The three round stones in this illustration have identical shapes and volumes. A is diamond, B is moissanite, and C is cubic zirconia. The figures are calculated estimates based on specific gravity.

A. Diamond, 1.00 ct. This is the reference stone, with a specific gravity of about 3.52. Both natural and lab-grown diamonds are diamond. See our guide to what defines a diamond for the distinction between material and origin.

B. Moissanite, about 0.91 ct. Synthetic moissanite has a specific gravity of about 3.22, so it weighs slightly less at the same volume. Read more about moissanite’s composition, properties and identification.

C. Cubic zirconia, about 1.59 to 1.70 ct. Cubic zirconia has a specific gravity of about 5.6 to 6.0 and weighs considerably more at the same volume. Look for “cubic zirconia” or “CZ” in the material specifications.

These estimates isolate the effect of density. Two stones measuring 6.5 mm across can differ in depth, girdle thickness and cut profile. This helps explain why the equal-volume example gives about 0.91 ct for moissanite while the manufacturer’s size chart lists an average of 0.88 ct. Use a measured weight or a verifiable specification for the individual stone.


3. What should you check when a listing says “1 carat”?

Read the material, dimensions and weight separately

A listing that reads “Round moissanite | 6.5 mm | 1.00 ct DEW” gives three pieces of information. Moissanite is the material, 6.5 mm is the stated diameter, and 1.00 ct DEW is the diamond size reference. The listing needs a separate actual weight to tell you what that individual moissanite weighs.

Check whether the weight is per stone or for the whole piece

A pair of earrings listed as “2.00 ct DEW total” may give the combined equivalent weight of both stones. If the seller confirms the stones are matched at the same specification, that works out to 1.00 ct DEW per stone. A ring listing may also add the centre stone and accent stones together, so ask for a breakdown when the centre stone size matters.

Use millimetres to compare how large stones look

Face-up measurements for a 6.5 mm round stone and an 8.0 by 6.0 mm oval stone

A round stone is measured by diameter. A non-round stone is measured by length and width. The numbers in the diagram are examples.

To compare how large a centre stone looks on the hand, start with its diameter if it is round, or its length and width for other shapes. Shape, length-to-width ratio, setting height and the surrounding metal can all change the appearance. If you are choosing a replacement stone for an existing setting, ask a jeweller to check the depth and girdle as well.

Ask the seller directly. “What is the centre stone made of? What are its dimensions in millimetres? Does the carat figure refer to the measured weight, the diamond equivalent weight or the total for the piece?” Keep those three details together when comparing listings.


4. Frequently asked questions about diamond equivalent weight

Does 1 ct DEW mean the stone weighs 1 ct?

It means the seller is using the size of an approximately one-carat diamond as a reference. Check the separate carat-weight figure or ask the seller for the stone’s measured weight.

Does every 6.5 mm round diamond weigh one carat?

A diameter of 6.5 mm is a common approximation. Round diamonds of the same diameter can have different weights because their depth, girdle thickness and cut proportions can differ.

Can I always convert 1 ct DEW to 0.91 ct of moissanite?

The 0.91 ct example assumes the same volume and cut profile as the reference diamond, using typical specific gravity values. Individual stones can be cut differently, so use the measured weight for the stone you are considering.

Does a DEW label tell me whether a stone is a lab-grown diamond?

DEW is a size reference. Confirm the material separately. Lab-grown diamond is diamond, while moissanite and cubic zirconia are different materials. If you are buying a lab-grown diamond, look for a clear material description and check the applicable grading documentation.


5. Further reading and sources

Further reading

What Is Moissanite? Composition, Properties and Identification — Learn what moissanite is and how gemmologists identify it.

What Is the Definition of a Diamond? — Read about the material and the distinction between natural and lab-grown origins.

Are Lab-Grown Diamonds Real Diamonds? — Understand how lab-grown diamonds differ from diamond simulants.

Sources

GIA · Diamond Carat Weight — The definition of a metric carat.

GIA · Synthetic Moissanite: A New Diamond Substitute — Specific gravity of diamond and synthetic moissanite.

GIA · Cubic Zirconia: An Update — The specific gravity range for cubic zirconia.

GIA · Man-made Diamonds: Questions and Answers — How diamonds and common simulants are classified.

Charles & Colvard · Moissanite Shapes and Sizes Chart — An example of a commercial size chart that gives both actual carat weight and DEW.

 
 
bottom of page