top of page

How Long Does It Take to Grow a Lab-Grown Diamond? 1 to 10 Carats in the Rough

Sep 5, 2024
12 min read

Updated: Nov 9

One producer reports growing a 1-carat rough diamond in about 2–3 days by high pressure, high temperature (HPHT), and in about a week by chemical vapour deposition (CVD). At 2 carats, the same producer reports 4–5 days for HPHT and 9–10 days for CVD. Equipment records put HPHT rough of around 10 carats at roughly 8–10 days. For CVD around that size, a useful industrial reference comes from Sinomach Precision Industry, which reports a growth cycle of about one month for its principal 6–15-carat rough range. [1] [2] [3] [4]


Growth times by rough diamond weight

Weight per rough crystal

HPHT

CVD

1 carat

2–3 days

7–8 days [1]

2 carats

4–5 days

9–10 days [1]

3 carats

5–9 days

10–14 days [1]

4 carats

9–12 days

14–19 days [1]

Around 10 carats

New Diamond Technology reported a 200–250-hour equipment cycle, with individual crystals of up to 10 carats in a batch.

Sinomach Precision Industry reports a CVD growth cycle of about one month, alongside a principal rough range of 6–15 carats. [3] [4]


The 1–4-carat figures come from the same producer so the published sizes can be compared directly. The 10-carat row uses two companies’ records for their respective batches or product ranges. Throughout this article, growth time ends when the rough crystal has grown.


A plate-like CVD diamond crystal beside a multifaceted HPHT crystal, both unpolished.

Figure 1. A plate-like CVD rough crystal on the left and a multifaceted HPHT rough crystal on the right illustrate two growth forms. (Illustration)


Contents


01 How long does 1–4-carat rough take to grow?

A 1-carat rough diamond weighs 0.2 grams. For HPHT at that weight, one producer reports 2–3 days, while Xinjiang Kaiyao Diamond gives about a week as its fastest example. For CVD, a commercial estimate and a published research case both point to about one week. For 2 carats, one HPHT supplier reports 4–5 days and another factory reports 7–10 days for 1.5–2-carat crystals. The weights are similar, but the factories use different equipment, seed loads and product specifications. [1] [5] [2] [6]


For 3 and 4 carats, Labrilliante reports 5–9 and 9–12 days for HPHT, and 10–14 and 14–19 days for CVD. In its 2024 response to the Shenzhen Stock Exchange, Sinomach Precision Industry lists 7–10 days for HPHT, alongside a principal rough range of 3–5 carats. It lists about one month for microwave CVD and a larger principal range of 6–15 carats. These figures show the time scales reported in commercial production. [1] [4]


02 Growth records from different factories

Method and source

Published growth time

Weight and quality specifications

CVD · CAS Ningbo Institute of Materials Technology and Engineering, 2019

About 7 days

A research crystal of about 1 carat. The team reported growth of about 7 micrometres in thickness per hour. [2]

HPHT · Jinan Jingangshi Technology, 2026

7–10 days

Crystals of 1.5–2 carats. The Jinan High-Tech Zone report includes technical-material applications and gives no jewellery colour or clarity grades. [6]

HPHT · Xinjiang Kaiyao Diamond, 2025

About 7 days at the fastest

A production technician gave roughly one week as the shortest reported cycle for about 1 carat of rough. [5]

HPHT · Hubei Zhongjing Diamond, 2024 and 2026

About 7 days

The 2024 report cites a 6-carat growth case and capacity to mass-produce colourless crystals of 3–6 carats. The factory gave a cycle of about seven days again in 2026, with no corresponding weight per crystal. [7] [8]

HPHT · Qingdao Jingyuan, 2026

7–10 days

The factory’s general manager described a cubic-press cycle without specifying an individual crystal weight. [9]

HPHT · Henan Liliang Diamond, 2021 and 2026

3–18 days in the prospectus, 7–15 days in a later interview

The prospectus gives synthesis times per press column for various products. The later factory report gives a growth cycle for rough. The two sources describe different product ranges. [10] [11]


A single factory may run batches with different target weights or quality requirements. When a source reports a seven-day cycle, check whether it also gives the weight of an individual rough crystal. For the growth methods, see CVD and HPHT lab-grown diamonds explained.


Gloved technician with tweezers examining one rough diamond above a tray of crystals from the same batch.

Figure 2. A technician examines rough crystals after a growth run. Crystals from one batch can vary in size and shape. (Illustration)


03 Growth times for rough of 10 carats and above


HPHT rough around 10 carats has been reported at about 8–10 days

In its study of New Diamond Technology, the Gemological Institute of America (GIA) documented HPHT growth runs of 200–250 hours, or about 8.3–10.4 days. A run could grow up to 16 crystals, with individual rough crystals reaching 10 carats. The International Gemological Institute (IGI) also reports that HPHT rough up to about 10 carats can grow in a single cycle of under two weeks. Both sources put the time scale at roughly one to two weeks. [3] [12]


A published CVD cycle around 10 carats is about one month

Sinomach Precision Industry’s comparison gives a CVD cycle of about one month and a principal rough range of 6–15 carats. This provides an industrial reference for rough around 10 carats. The company gives one figure for the range. Larger CVD cases from India also show that one producer can grow a larger crystal in less time than another producer takes for a smaller one. [4] [13] [14]

Published case

Rough weight and growth time

What the source reported

New Diamond Technology · HPHT, 2015

32.26 carats in under 300 hours, or under 12.5 days.

A single rough crystal reported by IGI. [15]

Greenlab · CVD, 2023

About 17 carats in 40–45 days.

Rapaport’s interview with the producer gives both the rough weight and growth time. [13]

Ethereal Green · CVD, 2022

About four weeks for the rough.

IGI’s account of the “Pride of India” gives 30.18 carats as the polished weight. The rough weight is undisclosed. [14]

Ethereal Green · CVD, 2024

About nine months for the rough, according to trade reporting.

GIA cites the “Celebration of India” case. The published 75.33 carats refers to the polished diamond. [16] [17]


Greenlab’s roughly 17-carat CVD crystal took 40–45 days. Ethereal Green has a published case of a larger crystal grown in about four weeks. The factories used different seeds and settings. To compare their hourly growth rates, we would need the starting seed dimensions, the directions in which the crystals grew and the actual growth hours at each stage. [13] [14]


GIA’s general guidance gives a wider range. It describes HPHT growth as taking days to weeks and a typical CVD process as taking about four to six weeks. When a question specifies a rough weight, the factory examples that pair a weight with a time are the better reference. [18]


04 Growth rates and the limits of larger crystals


What happens to the growth time when the weight doubles?

One producer’s CVD figures provide an example. Growth takes 7–8 days for 1 carat of rough, 9–10 days for 2 carats and 14–19 days for 4 carats. The producer does not disclose the seed size, chamber load or growth settings for each weight. These are times for separate target weights, so they cannot be read as a daily growth log for one crystal. [1]


Two simplified models. Doubling thickness on a fixed base doubles volume, while doubling all three dimensions multiplies volume by eight.

Figure 3. The left panel holds the base area constant while increasing thickness. The right panel scales all three dimensions equally. The models show how different changes in dimensions affect weight. (Illustration)


CVD usually builds thickness on the surface of a flat seed. If the effective base area and hourly deposition rate stay constant, the weight added can be approximately proportional to growth time. A steady rate of 30 micrometres per hour for 100 hours would add 3 millimetres of thickness. Converting that increase into carats also requires the effective area of the added crystal. [17] [19]


HPHT growth can occur on several crystal faces. As the crystal grows, more surface area may become available for carbon deposition. GIA notes that under certain conditions the rate of thickening per unit area can stay broadly steady while the whole crystal gains more weight per hour. If the temperature field, carbon supply or solvent conditions drift, growth can slow or crystal quality can decline. [3] [20]


What can happen if the run is extended?

HPHT equipment must hold pressure and a temperature gradient in the chamber throughout the run. As a crystal approaches the chamber’s available growth space, keeping the supply of carbon and solvent and the distribution of heat stable becomes harder. A research review describes some HPHT crystals of over 100 carats whose outer quality declined when they were grown very rapidly in a confined reaction space. [20]


In CVD, surface roughness, non-diamond carbon or polycrystalline growth at the edges can carry over into the next stage if deposition continues. Some processes pause to remove the crystal, clean or prepare the growth surface, then resume deposition. More time in the reactor can add thickness. How much usable material it adds depends on whether growth remains stable. [21] [19] [17]


05 Growth times for high-quality white and coloured diamonds


Does higher-quality rough take longer to grow?

With comparable equipment, crystal size and growth method, tighter requirements for purity, colour or internal cleanliness can favour more stable growth settings. GIA cites a study of high-purity colourless HPHT rough in which crystals could gain 8–10 milligrams per hour but were more prone to metallic inclusions. Limiting the maximum stable rate to around 6–7 milligrams per hour produced higher-quality crystals in that study. Other equipment and recipes can support different rates and results. [3]


In a 2024 microwave CVD experiment, the crystal thickened at about 10 micrometres per hour without added nitrogen and about 30 with 0.2% nitrogen. The rate reached around 45 micrometres per hour under the study conditions, with rougher surfaces, more internal stress and an increase in some defects. At 1.5% nitrogen, the growth rate fell. The experiment shows how a recipe can affect speed and quality. It gives no fixed time difference between jewellery colour or clarity grades. [19]


Do white and coloured diamonds take different lengths of time?

Target rough

What the grower controls

Implications for timing

Colourless to near-colourless

HPHT growth must limit nitrogen uptake. CVD requires control of gas composition, temperature and seed condition.

A higher purity target narrows the range of usable settings. Whether this extends a run depends on the factory’s settings. [3] [17]

Yellow

Nitrogen causes the yellow colour in some HPHT diamonds and can also promote growth.

The grower has to meet a target hue, intensity and distribution while maintaining the desired rate. [3] [17]

Blue

Some blue diamonds take up boron during growth. Its concentration and distribution affect the resulting colour.

The recipe and colour target both matter. The colour alone does not establish a time difference compared with white rough. [17]

Pink

The colour centres in some pink lab-grown diamonds are formed or adjusted after growth through processes such as irradiation and annealing.

The growth time refers to the starting rough. Any subsequent colour treatment is a separate stage. [22] [23]


Public sources document growth conditions for particular colours. Side-by-side timings for white, yellow, blue and pink rough of comparable weight and quality from the same factory are rare. The conditions can explain why a run might take longer. To calculate the difference in days, we would need comparable factory records.


Three unpolished rough diamond crystals. Near-colourless, yellow and blue, from left to right.

Figure 4. Near-colourless, yellow and blue lab-grown rough diamonds, from left to right. (Illustration)


06 What kind of rough suits round and fancy shapes?

Round, oval, pear and emerald cuts each need a different usable volume of rough. A round needs enough width in two directions and sufficient depth. An elongated shape also needs enough usable length along its long axis, as well as width and thickness. With CVD, further deposition can build thickness. If the rough needs more usable width, a larger seed or a change in growth direction may be needed. In a 16.41-carat princess-cut CVD case documented by GIA, imaging revealed up to seven growth stages. One large crystal can therefore be grown in several stages. See our article on how cut grading differs for fancy shapes. [17] [24]


Top and side views compare the width, length and usable depth required for round and elongated shapes.

Figure 5. A round needs sufficient width in both directions. An elongated shape needs length and width. Both need usable depth. (Illustration)


07 Milestones in diamond growth technology

Early experiments already achieved high deposition rates. Later advances increased the usable size of rough, the number of seeds a reactor could hold and the quality a factory could maintain throughout a run. When comparing milestones, check whether each figure measures an experimental deposition rate, the weight of one crystal or the time for an entire batch.

Period

Equipment or process change

Reported growth time or rate

1950s–1970

Early HPHT was used mainly for industrial materials. General Electric later grew small gem-quality crystals.

A University of Hawai‘i technical lecture gives about a week for early HPHT rough of around 1 carat. [25] [26]

1980–2010

Sumitomo Electric commercialised nitrogen-bearing crystals and later developed low-nitrogen type IIa crystals and large high-purity growth.

Research published in 2010 describes crystals up to 12 mm across, gaining about 6–8 milligrams per hour. [27]

2002–2005

Carnegie refined microwave plasma CVD for rapid single-crystal growth under research conditions.

The 2002 study reported 50–150 micrometres of thickness per hour. In 2005, a research crystal of about 10 carats was reported at about 100 micrometres per hour. [28] [29]

2015

New Diamond Technology improved its cubic press, chamber layout and thermal field.

A run of about 8–10 days could yield individual crystals up to about 10 carats. A separate 32.26-carat crystal took under 300 hours. [3] [15]

2016–2023

Producers in the US and India expanded CVD reactor use, with different processes for different rough sizes and quality targets.

In 2016, Diamond Foundry described a roughly two-week batch without stating the rough weight. In 2023, Greenlab reported 40–45 days for about 17 carats of rough. [30] [13]

2024–2026

Some factories reached cycles of about one week for multi-carat HPHT rough. Microwave CVD research continued to improve chamber uniformity and staged recipes.

In 2024, Sinomach Precision Industry listed 7–10 days for HPHT and about a month for CVD. In 2026, Qingdao Jingyuan reported about 7–10 days for HPHT. [4] [9] [31] [32]


Why do factories still use runs of several weeks?

The 2002 figures describe how quickly one crystal thickened under specific research conditions. A commercial run also has to deliver usable crystal area, low defect levels and a consistent batch. Across a larger growth area or more seeds, heat, plasma and carbon may be less evenly distributed. A factory may choose a slower, more stable setting. GIA reported in 2015 that New Diamond Technology reached 30–50 milligrams per hour after equipment adjustments, but sustaining that rate was difficult. [28] [3] [31]


08 How growth could get faster and what it would cost in yield


What could make crystals grow faster?

HPHT improvements include a larger usable growth area, a more stable temperature gradient, durable chamber materials and a more even carbon supply. After Hubei Zhongjing expanded its seed bed, its reject rate initially increased. It improved after the factory retuned pressure and temperature. A larger chamber can accommodate more seeds when conditions can be kept consistent across it. [7] [20]


CVD improvements include larger low-defect seeds, more uniform microwave plasma, steadier tray cooling and different gas settings at different growth stages. A 2025 study used chamber modelling and spectroscopy to improve plasma distribution. In 2026, a team used staged methane concentrations in a 915 MHz system to study deposition rate and internal stress. Factories would need to verify that such gains hold across different positions and over long runs. [17] [31] [32]


Does a shorter run improve output?

Track both the length of each run and how many rough crystals per machine per day meet the target specification. If faster growth increases inclusions, surface roughness or internal stress, a shorter run may yield fewer usable crystals. In the example below, the two runs have the same capacity. The seven-day run delivers fewer qualifying crystals per day. [3] [19]


Two hypothetical batches. A seven-day run yields 6.4 usable crystals per day, and a ten-day run yields 7.5.

Figure 6. Two hypothetical batches compare days in growth and usable crystals per day. The figures show how yield affects output. (Illustration)


Three details to check in a factory’s timing claim

First, confirm the weight of an individual rough crystal and how it was grown. Then check whether the time means continuous growth in the equipment or elapsed days across several stages. Finally, check the target colour, usable dimensions and quality. Also look for whether the figure describes a fastest case, a standard product cycle or batch output. Lightbox once described its factory-wide output as a carat every few minutes. The same report said individual batches spent hundreds of hours in the reactors. A line of reactors operating in parallel can deliver rough at a different rate from the growth of any one crystal. [33]


For the full sequence from seed preparation to rough and finished gem, read how lab-grown diamonds are formed.


Sources

Sources checked through November 2026. The links below include manufacturer figures, listed-company disclosures, factory interviews and published research.

 
 
bottom of page